|
eDART System™ Overview
System Software
Windows Support Software
System Hardware
eDART™ Data Manager
Solutions Builder
|
eDART System™ Hardware
eDART Quick Start Guide Lynx Devices - Machine Interfacing RJG Lynx™ digital devices feed data to the eDART process controller, allowing users to customize the controller to fit their needs. - Easy "connect and go" usability
- One-time entry of job information; reduced set-up time
- eDARTs recognize each sensor by digital ID and call up the job/mold associated with it
- Critical calibration information/diagnostics are embedded
| | Model |  | 1. ID7-D-SEQ
Sequence Input Module: Once wired to the molding machine, this module provides the system with machine timing sequences including injection forward, screw run, mold closed, first stage and mold opening. 2. IA1-D-VI
Analog Input Module: Analog sensors or equipment can be integrated with the eDART System™. This module accepts a 0-10 VDC signal from these devices and communicates it to the eDART. 3. OR2-D
Dual Relay Output Module: For machines and automation equipment that accept digital signals, this device provides a normally open or normally closed contact for process control or 3-way part sorting. Details | | ID7-D-SEQ - Sequence Input Module | | | | | Power (supplied by eDART)
| 12VDC | | | Current Draw | 45mA | | | Absolute Maximum Input Voltage | 36VDC | | | Minimum Trigger on Voltage | 18VDC | | | Product Manual | Download | | | Solid Model | NA | | | | | | OR2-D - Dual Relay Output Module | | | | | Power (supplied by eDART)
| 12 VDC | | | Current Draw | 50mA | | | Contact Rating | 1A 30V DC | | | Product Manual | Download | | | Solid Model | NA | | | | | | IA1-D-VI - Analog Input Module | | | | | Power (supplied by eDART) | 12VDC | | | Current Draw
| 95mA | | | Input Impedance
| 10 MOhms | | | Voltage Accuracy
| 0.1% | | | Current Accuracy
| 0.1% | | | Current Sensing Resistance | 470 Ohms | | | Product Manual | Download | | | Solid Model | NA | | | Close | |
 | LE-R-30
LE-R-50
Stroke-Velocity Sensors: Tracking injection velocity, shot volume, cushion, and plasticizing rates is as simple as connecting a Stroke/Velocity sensor. The stroke/velocity sensor is available in various cable lengths for use on a variety of machine sizes. Details | | | Power (supplied by eDART)
| 12VDC | | | Current Draw | 65mA | | | Product Manual | Download | | | Solid Model | NA | | | Close | |
 | LS-QTTB-J
LS-QTTB-K
Lynx Quad Temp Thermocouple Sensors: Connecting these sensors with new and existing thermocouples provides you with insight into the key process variables. Thermocouple sensors give you the ability to track barrel zone, mold, and mold coolant temperatures. Details | | | Thermocouple Types and Range
|
| | | LS-QTTB-J | Type J 0-400 °C (32-752 °F) | | | LS-QTTB-K | Type K 0-200 °C (32-392 °F) (0-500 °C on special request) | | | Case Temperature | 0-60 °C (32-140 °F) | | | Accuracy | `2 °C (`3.6 °F) | | | Maximum Sample Rate | 500 samples/second each channel | | | Product Manual | Download | | | Solid Model | NA | | | Close | |
 | LS-H-¼NPT-3K
Lynx™ Hydraulic Sensor: The eDART calculates injection pressure and plots it along with other profiles. These curves provide many machine and process variables, displaying hydraulic consistency and repeatability over time. Details | | | Range |
| | | Accuracy | | | | Standard Cable Lengths | | | | Max Temp. (sensor) | | | | Max Temp. (case) | | | | Sensing Element | | | | Product Manual | Download | | | Solid Model | NA | | | Close | |
 | Lynx™ Cavity Pressure Sensors: Implementing cavity pressure has never been simpler than with digital cavity pressure sensors. Sensors are automatically recognized by the eDART and identify themselves along with the mold being run. Details |
 | The LS-DP-100
Lynx Water Flow Sensor: The sensor measures the difference in coolant pressure between the mold inlet and outlet and is designed to be used with the eDART System™. This provides information about the cooling capability and consistency supplied to the molded part. Details | | | Maximum pressure at either port
| 150 psi (10.3 bar) | | | Maximum measurable difference | 100 psi (6.88 bar) | | | Maximum Case Temperature | 140 °F (60 °C) | | | Maximum Coolant Temperature | 180 °F (82 °C) | | | Accuracy | 2% | | | Zero | 0.1% | | | Pressure Input Connection | 1/4-18 NPT | | | Lynx Connector | Microstyle DC connector | | | Product Manual | Download | | | Solid Model | NA | | | Close | |
 | IA1-S-VI-24
OR2-S
ID7-S-SEQ
OA1-S-V
Lynx Surface Mount Modules: These can be mounted inside or outside the molding machine or on or within auxiliary equipment. The Analog Input Module interfaces with temperature, dew point, pressure and other remote sensors. The Dual Relay Output Module supplies signals to part diverters, valve gate controllers, machine input cards and other applications. Details | | IA1-S-VI-24 - Analog Input Module | | | | | Input Range |
| | | 0-10V Mode (Standard as shipped) | 0V to 10V | | | 4-20mA Mode | 4mA to 20mA | | | Output Range | | | | Voltage Range | 23-26V | | | Maximum Drawable Current | 100mA | | | Case Temperature Range | 0 - 60 °C (32 - 140 °F) | | | Accuracy | +/- .1% FS | | | Maximum Sample Rate | 500 samples/second | | | Resolution | | | | 0-10V Mode (Standard as shipped) | 2.44 mV per step | | | 4-20mA Mode | 3.9 uA per step | | | Product Manual | Download | | | Solid Model | NA | | | | | OR2-S - Dual Relay Output
Module | | | | | Product Manual | Download | | | Solid Model | NA | | | | | | ID7-S-SEQ - Sequence Input Module | | | | | Product Manual | Download | | | Solid Model | NA | | | | | | OA1-S-V - Analog Output Module | | | | | Output Range | | | | Voltage Range
| 0-10V DC | | | 0-10V Output Resistance | 175k Ohms | | | Case Temperature Range | 0-60 °C (32 - 140 °F) | | | Accuracy | 0.5% | | | Product Manual | Download | | | Solid Model | NA | | | Close | |
 | PZ/LX1-S
LP-LX1-M
SG-LX1-S
Sensor Adapters: These sensor adapters allow standard piezoelectric and strain gage sensors to be connected to the eDART. Details | | PZLX1-S - Piezo Adapter | |
| | | Range
| 0 - 20000 pC | | | Accuracy | ±1% | | | Max. Temp. (Operating) | 140° F | | | Warm-up Time | 5 minutes | | | Product Manual | Download | | | Solid Model | NA | | | | | | LP-LX1-M - Mold Mount Piezo Adapter | | | | | Range | 0 - 20000 pC | | | Accuracy | ±1% | | | Max. Temp. (Operating) | 140°F | | | Warm-up Time | 5 minutes | | | Product Manual | Download | | | Solid Model | NA | | | | | | SG-LX1-S Sensor Adapter | | | | | Power (supplied by eDART™) | 12VDC | | | Current Draw | 45mA | | | Supplied Excitation Voltage | 5.000V | | | Maximum Differential Input Voltage | 10.00mV | | | Product Manual | Download | | | Solid Model | NA | | | Close | |
 | PZ/LX4F-S - 4 Channel Piezo Adapter
PZ/LX8F-S - 8 Channel Piezo Adapter
PZ-4 - 4 Channel Piezo Connector
PZ-8 - 8 Channel Piezo Connector The Lynx Four and Eight Channel Piezo Adapters for Fischer Connectors provide piezoelectric cavity pressure sensor users with a convenient, simple interface to Fischer connector based four and eight channel piezoelectric systems. Details | | | Channels
| 4 or 8 Piezo channels | | | Piezo Input Connector | Fischer 6 Pin w/cap | | | Range | 0 - 20000 pC | | | Accuracy | ±1% | | | Max. Temp. (Operating) | 140° F | | | Warm-up Time | 5 minutes | | | 4 Channel Piezo Adapter with ID capabilities | Download | | | 4 Channel Piezo Connector | Download | | | 8 Channel Piezo Adapter with ID capabilities | Download | | | 8 Channel Piezo Connector | Download | | | Close | |
 | Lynx Indicator Light Tree - LT3 1-2-24 & LT3 1-2-120: Details | Components - eDART REDI Kit (electric)
- eDART REDI Kit (hydraulic)
- Touchscreen
- 360° Slip Ring
- Sumitomo Interface
- Basic 3-Stage Control
|
3111 Park Drive
Traverse City, MI (USA) 49686
P. 231 947-3111
F. 231 947-6403
© Copyright 2012 RJG Inc. |
Sitemap |
Privacy Notice | Injection Molding Training | All Rights Reserved
.
